Using Midi Clock To Control Arpeggio Tempo - Yamaha KX25 Owner's Manual

Arpeggio

Using MIDI Clock to control Arpeggio tempo

With the initial default setting (Sync = Auto on page 36), the Arpeggio is played back according to the
tempo determined by the internal or external clock as described below.
When MIDI clock is received from an external MIDI device:
The Arpeggio will play back according to the tempo of the received MIDI clock.
When MIDI clock is not received:
The Arpeggio will play back according to the internal tempo set on the KX.
When MIDI clock is received from an external MIDI device:
KX
Playback data
DAW software, etc.
When using Cubase, you can transmit MIDI clock from the computer to the KX by following the
procedure below.
1.
Select "Project Synchronization Setup"
from the "Transport" menu on Cubase to
call up the "Project Synchronization
Setup" dialog.
32
Arpeggio
Tempo:
Determined by the speed with
which MIDI clock is received
from the external device.
MIDI clock
TEMPO=120
Owner's Manual
When MIDI clock is not received:
KX
Arpeggio
Tempo:
Set in the Utility display
(page 36).
Playback data
DAW software, etc.
2.
Enter checkmarks to the "Yamaha KX-1"
(when using Windows) and "MIDI Clock
Follows Project Position" of the "MIDI
Clock Destination" at the lower right of
the dialog.
When using Mac OS, enter a checkmark to
"YAMAHA KX Port 1."
The KX provides three USB MIDI Ports
NOTE
each of which has a different, specific
use. For details, see page 18.
3.
Click [OK] to close the "Project
Synchronization Setup" dialog.
· Without checkmark to the "Send MIDI
NOTE
Clock in Stop Mode" of the "MIDI Clock
Destination", MIDI clock is transmitted
from Cubase (on the computer) only
when recording or playback is
performed on Cubase. If entering
checkmark, MIDI clock is always
transmitted.
· For information about DAW software
other than Cubase and how to transmit
clock data from the MIDI device, refer
to the owner's manual of the DAW
software/MIDI device.
· You can select the setting which lets
you always use the internal MIDI clock
of the KX to play the Arpeggio even if
an external clock are received from the
external MIDI device. For details, refer
to "Utility Settings" on page 36.