Open Source; Application Information; Energy Device; Installer Settings - LG ESS Home 10 User Manual

18 Operating

Open source

You can check the open source information of the application and the system.
Select [ ] > [Open source] to display the open source notice screen.
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available for download. LG Electronics will also
2
provide open source code to you on CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping, and handling) upon email request to opensource@
lge.com. This offer is valid for three(3) years from the date on which you purchased the product.

Application Information

Select [ ] > [Application information] to display the application information screen.

Energy Device

Select [ ] > [Energy Device] to display the Energy Device screen.

Installer Settings

The system needs various system settingsby installer when installing. Users are not allowed to enter
[Installer Settings] menu. Try not to enter the menu. It may cause serious malfuction on the system,
if user changes settings on the[Installer Settings] menu.
You can check the information of this application
such as application name and application version.
[eV]
Tap this switch to select [On] or [Off]. When 'EV
Meter Enable' not setting, Error Popup occurred.
After setting, EV monitoring can be enable.
[AWhP]
Tap this switch to select [On] or [Off]. When
AWHP is not connected, can not be set on and
Error Popup occurred.