Yamaha Electone EL-87 Owner's Manual page 130

Any existing pattern data that follows
an Ending pattern is automatically
deleted.
N O T E :
An Intro or Fill In pattern entered to the
first position is not registered as a
measure, and the current measure display
shows "-Bar" even though a pattern has
been entered.
N O T E :
The Coarse button can also be used with
the cursor controls to move the cursor
several steps at a time.
126
About Entering Intro. And Ending Patterns:
Pressing the INTRO. ENDING button when at the first
position in the pattern row automatically enters an Intro
pattern there. Pressing the INTRO. ENDING button at any
other position in the row enters an Ending pattern.
4
Use the cursor controls to move the cursor along the pattern
row in the display and select the position at which patterns will
be entered. Then use the data controls to enter and delete pattern
numbers in the pattern row.
SEQUENCE Page
Cursor Controls
1
<< Moves the cursor to the first position.
- 1
1
- 2 < Moves the cursor one measure to the left.
1
> Moves the cursor one measure to the right.
- 3
1
Data Controls
2
2 - PRESET/USER
1
Determins the type of rhythm, Preset or User.
2 - SET
2
For initially entering a pattern number to an empty position in
the pattern row, or for replacing a pattern at the cursor position.
2 - INS. (Insert)
3
For inserting a pattern number before the current cursor position.
The new pattern is entered to the cursor position and all other
patterns to the right of the cusor are moved to accommodate the
new number. The operation is the same as for SET .
2- DEL. (Delete)
4
For deleting a pattern number at the current cursor position.
2- CLEAR
5
For erasing all patterns entered to the selected sequence. After
selecting CLEAR, the display for confirmation of the operation
appears.
Select "OK" to clear the currently selected rhythm sequence, or
"Cancel" to abort the operation and return to the previous display.