Yamaha Electone EL-400 Owner's Manual page 94

9) Checking the Remaining Memory
You can check the amount of memory available for additional recording
in a disk by pressing PAUSE button while holding down SHIFT button.
The amount of available memory will be displayed on the LED.
The maximum amount of memory is ca.700 for 2DD disks and ca.1400
for 2HD disks.
10) Voice Disks and Pattern Disks
The M.D.R. also allows you to select voices and rhythms from optional
disks.
To load the Voice Disk voices:
1
Insert the Voice Disk into the disk slot under the Music Disk
Recorder.
The following message appears.
DATA CONTROL
6
2
Press an appropriate voice button.
The following display appears.
3
Select the voice you want to use using the Data Control buttons.
Jumps back Jumps ahead
10 numbers 10 numbers
DATA CONTROL
Selects Selects
previous next
number number
4
Play the keyboard to check the sound of the voice.
94
Voice Number Voice Name
RECORD
(LEAD) (K.PERC.)
PAUSE
REM.MEM.
NOTE:
The EL-400 can read the data of the EL-500 Voice
Disk.
DATA CONTROL
NOTE:
Any one of the voice sections can be used here.
Make sure that the volumes of all other voices are
set to off (the minimum value).
Save
DATA CONTROL
Selects Selects
previous next
number number
NOTE:
Refer to the voice list included in the Voice Disk
for the information on each voice.
PLAY
SHIFT
(LEAD) (K.PERC.)