Quick Introductory Guide; Getting Started - Yamaha Electone EL-400 Owner's Manual

1

Quick Introductory Guide

1

Getting Started

1
Plug the power cord in to an appropriate electrical outlet.
2
Turn on the Electone by pressing the POWER switch.
When you turn on the Electone, the following displays will appear one
after the other on the LCD display:
This last display, Voice Display, shows you the currently assigned
voice settings for each voice section.
When the Electone is turned on, Basic Registration 1 is automatically
selected.
10
POWER
Only use the voltage specified as correct
for the Electone. The required voltage is
printed on the name plate of the Electone.
Yamaha products are manufactured
specifically for the supply voltage in the
area where they are to be sold. If you
should move, or if any doubt exists about
the supply voltage, please consult with a
qualified technician.