Accessory Jacks And Controls - Yamaha Electone EL-400 Owner's Manual

10

Accessory Jacks and Controls

On the underside of the Electone keyboard is a separate panel equipped with various input/output terminals
and miscellaneous controls, the functions of which are described below.
L
RHYTHM
1 Input Jack
RHYTHM IN (Phone, L/R)
This pair of phone jacks is for connection to an external rhythm machine.
The sound of the connected device is mixed with the sound of the Electone
and played through the Electone's speaker system. The volume of the
rhythm machine can be controlled by the Expression pedal of the Electone.
2 Output Jacks
2
-1 AUX. OUT (RCA, L/R)
This pair of RCA jacks is for connection to an external amplifier/
speaker.
2
HEADPHONES (Phone)
-2
For connection of a stereo headphone set. When headphones are
connected to this jack, sound to the Electone's built-in speaker
system is automatically cut off, allowing you to play without
disturbing others.
3 MIDI IN/OUT
For connecting external devices such as synthesizer and rhythm machine
with MIDI cables. MIDI cables are required (page 109).
4 TO HOST
This terminal can be connected to the serial port of a personal computer
instead of using MIDI connection.
5 HOST SELECT
When you have connected the Electone and the personal computer using the
TO HOST terminal, you need to select the appropriate setting here
depending on the computer used. (page 108)
1 2 2
-1
IN OUT
HEADPHONES
R L R
AUX.
-2
4
5
HOST TO SELECT HOST
Mac MIDI
- 1 PC - 2 PC
MIDI
IN OUT
3
NOTE:
See next page for the details of the
connection using the TO HOST terminal.
10
107