Yamaha Electone EL-200 Owner's Manual page 14

3
Set the volume for each voice section.
Use the VOLUME controls of each voice section on the panel to set the
desired level for each voice.
The controls have seven volume settings, from a minimum of 0, or no
sound, to a maximum of full volume.
2
Adjust the volume balance between each voice group as you play the
keyboards.
About TO LOWER - Playing (Upper) Lead Voice and Pedal Voice from the Lower keyboard:
The Electone has a special "To Lower" function that lets you assign Lead or
Bass voices to the Lower keyboard. Simply press the TO LOWER button
on the voice section you wish to assign, and that voice will be playable
from the Lower keyboard.
VIOLIN
OBOE
Turning the Electone off erases all panel settings you have made. When the Electone is turned on, Basic Registration 1 is automatically
selected.
If you have made panel settings you wish to keep, save them to Registration Memory before turning the Electone off. (See page 25 for more
information.)
You can, however, restore the panel settings that were made before the Electone was last turned off. (See page 27 for more information.)
14
UPPER KEYBOARD VOICE
STRINGS BRASS CLARI- SAXO- CHORUS
NET PHONE
ORGAN PIANO GUITAR VIBRA- COSMIC
PHONE
LEAD VOICE
MAX
FLUTE 1 CONTRA
TRUM- TO
PET LOWER
MIN
MAX
HARMO- 1
NICA
TUTTI
2
MIN
PEDAL VOICE 1
MAX
ELEC. 1
BASS BASS
ORGAN TUBA TO
BASS LOWER
MIN
NOTE:
The Lead and Pedal Voices sound one note
at a time; when you simultaneously press
two or more keys, only the highest note
will sound.
When the TO LOWER button is turned
on, the Lead voices and Pedal voices
cannot be played on the Upper keyboard
and Pedalboard, respectively.