Craftsman 2000 Series User Manual page 7

Items Needed:
Grommet (Qty: 2)
Process:
• Place the grommet in the holes at back of cabinet.
Items Needed:
1/4-20 x 3/4" Button Head Screw (Qty: 1)
1/4-20 Serrated Flange Nut (Qty: 1)
14-10 X 3" Screw (Qty:1)
WARNING
Cabinet MUST be attached to a stud in a wood frame wall.
Failure to do so may cause personal injury or product
damage.
Hardware provided for wood frame wall use only. Concrete
or other surfaces will require other hardware (not provided).
Use appropriate hardware per your local building codes.
Failure to do so may cause personal injury or product
damage.
Process:
• Place mounting bracket in desired mounting location.
Mark center of mounting hole location, using slots in
bracket as a template.
• Remove bracket. Drill 1/4" mounting hole.
• Mount to unit using (1) screw and (1) nut.
• Finger tighten.
NOTE: Mounting bracket may be mounted on either side
of the cabinet. Mounting shown on left side.
Nut
Screw
Mounting
Bracket
• Align cabinet with a stud. Adjust leveler feet if needed.
• Drill 1/8" pilot hole.
• Attach cabinet to stud using 14-10 X 3" Screw.
Screw
7
8