Track Mix - Yamaha Clavinova CVP-89 Owner's Manual

50
Utility Functions
Extra Performance Memory track space can be created by using this function to mix the data from two tracks to a single
track. The data from the "source" and "destination" tracks is mixed and the result placed in the destination track. You can
also use this function to copy data from one track to another by specifying a blank destination track (i.e. the source track
data is copied to the destination track.
Z
X
C
V
B
This function allows you to individually adjust the playback volume of each of the Performance Memory tracks.
Z
Make sure that the disk containing the song with the tracks you want to mix is
loaded in the Clavinova disk drive, and that the song to be affected is selected.
Select the Track Mix function — see "Selecting & Using the Utility Functions",
page 42. "NO/YES" will flash on the display. Press the TEMPO [s] button (YES) to
engage the Track Mix function or the [t] button (NO) to cancel. Once you've pressed
the TEMPO [s] button to engage the function you can release the [UTILITY] button.
Use the [TAP] and [METRONOME] buttons to select the source track.
Use the TEMPO [s] and [t] buttons to select the destination track.
Press the [START/STOP] button to start the actual track mix operation. The
number of the measure being processed will appear in the lower right corner of the
display. The Track Mix function will automatically be exited when the data has been
mixed.
Make sure that the disk containing the song you want to set volume levels for is
loaded in the Clavinova disk drive, that the [SONG SELECT] indicator is lit, and that
the song to be affected is selected.