Playing Back Only Specific Parts; Turning Individual Orchestra Parts On Or Off; Via The Panel Controls; Via The Keyboard - Yamaha Clavinova CVP-89 Owner's Manual

V
[ ]
When you've finished with the currently loaded disk, simply press the disk drive
EJECT button to remove it.
The [RIGHT/1], [LEFT/2], [ORCH/3-10], and [RHYTHM] buttons can be used to
select playback of specific parts. The [LEFT/2] button turns the left-hand part on or off,
the [RIGHT/1] button turns the right-hand part on or off, the [ORCH/3-10] button turns
the ORCHESTRA parts on or off, and the [RHYTHM] button turns the rhythm part on
or off. When a part is on, the corresponding LED indicator lights. You can, for example,
turn off the right and/or left-hand parts so you can practice them on the keyboard.
Normally the [ORCH/3-10] buttons turns all the orchestra parts (tracks 3 through
10)* on or off at once. You can, however, turn these parts on or off individually. There
are two ways to do this:
Turn the desired tracks on or off by pressing the keys shown in the illustration to the
left while holding the [ORCH/3-10] button (the current status of the tracks is shown
on the display while the [ORCH/3-10] button is held):
Press the key once to move the cursor to the tracks on the display, and a second to
turn the track on or off. The status of the track is indicated by the track number (or
letter):
Use the [TAP] and [METRONOME] buttons while holding the [ORCH/3-10] button
to move the cursor on the display to the number of the track you want to turn on or
off, then, still holding the [ORCH/3-10] button, use the TEMPO [s] and [t] but-
tons to turn the track on or off.
In addition to the main display, the status of tracks 3 through 16 is indicated by the
corresponding keyboard guide lamps while the [ORCH/3-10] button is held. If a
lamp is out, the corresponding track contains no data. A flashing lamp indicates that
playback is off, and a lit lamp indicates that playbacks is on.
Disk Orchestra
31