Function Descriptions; F1.Tune (Keyboard Fine Tuning); F2.Ktune (Key-By-Key Fine Tuning) - Yamaha Clavinova CLP-611 Owner's Manual

Function descriptions

F1.Tune (Keyboard fine tuning)

You use this function to fine-tune the pitch over
the entire keyboard. This function is useful, for
example, when you need to adjust tuning when
playing with other instruments.
1 To access this item, enter FUNCTION mode and
select main function F1.
1
ROOM
NORMAL MEDIUM
BRILLIANCE REVERB EFFECT TOUCH
2 The screen shows the current pitch (in hertz) for key
A3. You can adjust the pitch (in increments of about
0.2 hertz) by pressing [-/NO] or [+/YES]. The adjust-
ment automatically carries over to all keys on the
keyboard.
Values: 427.0 to 453.0 (hertz)
Default: 440.0 (hertz)
• Hertz: Frequency, in cycles per second; abbreviated as
"Hz". The frequency of a sound wave determines its
pitch, with higher frequencies producing higher pitches.
You can make the same adjustment directly from
NOTE
the keyboard without entering [FUNCTION]
mode, as follows.
To raise the pitch (by about 0.2 Hz)...
Hold down the two lowest white keys (A-1 and B-1) and
hit any key from C3 to B3.
To lower the pitch (by about 0.2 Hz)...
Hold down the two lowest keys (A-1 and A -1) and hit any
key from C3 to B3.
To reset to standard pitch...
Hold down the three lowest keys (A-1, A -1, B-1) and hit
any key from C3 to B3.
You can also adjust pitch in increments of about 1
NOTE
Hz (without entering FUNCTION mode) as
follows.
To raise or lower the pitch...
Hold down keys A-1 and B-1 (the two lowest white keys)
or else A-1 and A -1 (the two lowest keys), and press [-/
NO] or [+/YES].
To reset to standard pitch...
Hold down keys A-1 and B-1 or else A-1 and A -1 and
press
[-/NO] and [+/YES] at the same time.
(Note that the screen will show the TUNE display when
you hold down keys A-1 and either A -1 or B-1, and will
then return to normal display when these keys are re-
leased.)

F2.KTune (Key-by-key fine tuning)

This function lets you adjust the pitch of indi-
vidual keys, so that you can set up your own
customized scaling system (temperament). The
function also allows you to switch this custom-
ized scaling system OFF or ON at any time.
1 To access this item, enter FUNCTION mode and
proceed to main function F2.
2
TEMPO
2 The screen indicates whether the function is ON or
OFF. You can toggle the setting by pressing either
[-/NO] or [+/YES]. You must set the function ON if
you wish to adjust the tuning.
Values:
Default: OFF
• The ON/OFF setting determines whether this customized
3 After setting the function ON, hit the key that you
want to tune.
The screen displays the name of the struck key.
4 You can now adjust the pitch for that key by pressing
[-/NO] or [+/YES]. Adjustment is in 1-cent incre-
ments, and is indicated as a relative value ("0"
produces standard pitch).
Values:
Default: 0 (standard pitch) for all keys
You can repeat this procedure (3 and 4) to adjust pitch
for as many keys as you like.
Cent: One-hundredth of a semitone. (100 cents = 1 semitone)
To reset fine tuning of all keys to "0"...
1 Press down the three lowest keys on the keyboard
(A-1, A -1, and B-1) at the same time. The screen will
display the following.
2 Press [+/YES] to reset.
CLP-811/611
1
ROOM
NORMAL MEDIUM
BRILLIANCE REVERB EFFECT TOUCH
ON, OFF
tuning is used during play. Set ON to use the tuning, or
OFF to use standard tuning.
ROOM
NORMAL MEDIUM
BRILLIANCE REVERB EFFECT TOUCH
-50,...,+50 (cents)
ROOM
NORMAL MEDIUM
BRILLIANCE REVERB EFFECT TOUCH
Configuration Functions (FUNCTION mode)
2
TEMPO
3 4
TEMPO
TEMPO
27