Table of Contents
Advertisement
Hardware Setup
2.4
Hardware Setup With LaunchPad Only
NOTE: For this setup, a wire must be connected to the 5-V supply on the CC3220 LaunchPad and
soldered to TP3 on the OV788 reference board to correctly supply power to it.
The adapter board does not supply 5-V power, as the connectors on the Omnivision board do not have a
line for 5 V.
Mount the adapter on the CC3220 LaunchPad, ensuring the VCC and GND pins are aligned, then mount
the OV788 board on the adapter, aligning the GND and power pins.
Set up the demo as shown in
8
SimpleLink™ CC3220-OV788 Audio/Video Streaming Reference
Figure
6.
Figure 6. CC3220 LaunchPad Setup
Copyright © 2018, Texas Instruments Incorporated
www.ti.com
SWRA599 – March 2018
Submit Documentation Feedback
Advertisement
Table of Contents
