Table of Contents
Advertisement
www.ti.com
5. Connect the CC3220 LaunchPad to the PC, and press Connect.
6. Press Generate Image
3.2
Connecting the CC3220-OV788 Setup to the AP
The camera must first be provisioned an access point to enable streaming over a local network. Directions
for provisioning are:
1. Connect the CC3220 LaunchPad USB to the PC.
2. (Optional) Open the serial terminal to the COM port for the CC3220. The Omnivision debug port has
the following settings:
•
Bits per second: 115200
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: None
Reset the CC3220 LaunchPad and
to an AP after 10 seconds:
SWRA599 – March 2018
Submit Documentation Feedback
, then Program Image.
Figure 9
shows in the terminal if the CC3220 is not able to connect
Figure 9. Starting Provisioning
SimpleLink™ CC3220-OV788 Audio/Video Streaming Reference
Copyright © 2018, Texas Instruments Incorporated
Running the Setup
11
Advertisement
Table of Contents
