Other Midi Functions; Local Control On/Off; Program Change On/Off - Yamaha Clavinova CLP-157 Owner's Manual

MIDI Functions
The MIDI functions listed to the right are engaged by
holding down the [MIDI/TRANSPOSE] button and press-
ing the corresponding voice selector. Full details are given
in the following pages.

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the Clavinova keyboard controls its internal tone generator,
allowing the internal voices to be played directly from the keyboard. This situation is "Local Control ON" since
the internal tone generator is controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the Clavinova keyboard does not play the internal voices,
but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on
the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI
IN connector.
When using the DOU-10 Disk Orchestra Unit with the Clavinova, for example, Local Control should be
turned OFF when recording using the DOU-10 voices only, and ON when recording the Clavinova voices while
listening to playback of the DOU-10 voices.
MIDI/
PIANO 1
TRANSPOSE
PIANO 1
= Local Control OFF
PIANO 1
= Local Control ON

Program Change ON/OFF

Normally the Clavinova will respond to MIDI program change numbers received from an external keyboard
or other MIDI device, causing the correspondingly numbered Clavinova voice to be selected. The Clavinova
will normally also send a MIDI program change number whenever one of its voices is selected, causing the
correspondingly numbered voice or program to be selected on the external MIDI device if the device is set up to
receive and respond to MIDI program change numbers.
This function makes it possible to cancel program change number reception and transmission so that voices
can be selected on the Clavinova without affecting the external MIDI device, and vice versa.
MIDI/
PIANO 1
TRANSPOSE
PIANO 2
= Program Change OFF
PIANO 2
= Program Change ON
20

Other MIDI Functions

Z
Hold down the [MIDI/TRANSPOSE] button.
PIANO 2 PIANO
X
Press the [PIANO 1] voice selector. If the PIANO 1 LED is lit when
the [PIANO 1] voice selector is pressed, you have turned local control
OFF. If the PIANO 1 LED is not lit when the [PIANO 1] voice selector
is pressed, you have turned local control ON.
C
Release the [MIDI/TRANSPOSE] button.
Z
Hold down the [MIDI/TRANSPOSE] button.
PIANO 2 PIANO
X
Press the [PIANO 2] voice selector. If the PIANO 2 LED is lit when
the [PIANO 2] voice selector is pressed, you have turned program
change reception/transmission OFF. If the PIANO 2 LED is not lit
when the [PIANO 2] voice selector is pressed, you have turned pro-
gram change reception/transmission ON.
C
Release the [MIDI/TRANSPOSE] button.
MIDI FUNCTION CHART
Function
Local Control ON/OFF
Program Change ON/OFF
Control Change ON/OFF
Multi-Timbre Mode
MIDI Split & Left Local OFF
MIDI Split & Right Local OFF
Panel Data Transmit
CLP-157 Voice Selector
[PIANO 1]
[PIANO 2]
[PIANO 3]
[CLAVINOVA TONE ]
[E.PIANO 1]
[E.PIANO 2]
[HARPSICHORD]