Advertisement
Available languages
Available languages
Installation instructions from the
front of the appliances
Screw adjustable feet (for support-
ing the doors) in fully using spanner
supplied. They must not touch the
floor.
Fit caps to the four front adjustable
feet.
Place the appliances next to one an-
other so that the fronts are aligned,
leaving a gap of 10 mm between
them.
en - Installing in a side-by-side combination
Remove top covers .
Attaching the connecting plate aligns
both appliances in height and depth to
each other. If one appliance stands
higher than the other, start with the
higher one first.
Place the connecting plate in posi-
tion, and loosely secure it to one of
the appliances with two screws .
Adjust the connecting plate until
the centre piece of the plate lines up
with the side of the appliance.
Then tighten both screws .
Screw connecting plate to the
second appliance. When doing so
push the appliances together or fur-
ther apart if necessary.
25
Advertisement
