Hardware Contents; General Pump Information - Utilitech 148013 Manual

PACKAGE CONTENTS
PART DESCRIPTION
A Pump/Tank
B Tank Hose
C Tank Tee

HARDWARE CONTENTS

Tank Hose
AA
Gasket
PREPARATION
Before beginning installation of product, make sure all parts are present. If any part is missing or
damaged, do not attempt to assemble the product. Compare parts to package contents list and
hardware contents list.
Estimated Installation Time: 2 hours.
Tools Required for New Installation (not included): pipe wrench, pliers, Phillips screwdriver, pipe clamp,
2-step PVC glue system (primer and sealer), thread tape, tire gauge.
Parts Required for New Installation (not included): well seal, 1-1/4 in. male PVC adapter (2), 1 in. male
PVC adapter, 1-1/4 in. foot valve, 1-1/4 in. PVC pipe and couplings, 1 in. PVC pipe and couplings, 1-1/4
in. PVC elbow, 1 in. discharge tee, galvanized bushing, pressure gauge (optional) or pipe plug, 1-1/4 in.
union (optional), 1 in. union (optional), electrical wire, electrical wire strain relief, shut off valve (optional).

GENERAL PUMP INFORMATION

FOR USE WITH A PRESSURE TANK. DO NOT
USE FOR IRRIGATION APPLICATIONS!
Typical Pump Setup
1. Shallow well jet pumps are designed for use
where the suction lift is 25 ft. or less. They
can be used with drilled or cased wells.
QUANTITY
1
1
1 B
x 1
4
C
1
Discharge
to Home
Suction
Lift
1-1/4 in.
Suction
Pipe
25 ft.
Pipe
Max
Support
Water Level
Foot Valve
A
3/4 or 1 in.
Discharge Pipe
A
IL1104