Scandomestic WAH 1501 User Manual page 54

Table of Contents

Advertisement

Available languages

Available languages

MAINTENANCES
Cleaning The Drain Pump Filter
Warning!
Be careful of the hot water!
Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
Open the Service filter
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak;
• Some machines don't have emergency drain hose, rotate lower cover cap directly
to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
1
Open the filter by turning
to the counter clockwise
2
Remove extraneous
matter
10
28
3
Close the lower cover cap
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents