Advertisement
Setting up your double-door refrigerator
Select a site
Site requirements:
ꞏ Solid, level surface without carpeting or flooring that may obstruct ventilation.
ꞏ Away from direct sunlight.
ꞏ Adequate room for opening and closing the door
ꞏ Away from a heat source
ꞏ Room for maintenance and servicing
ꞏ Temperature range: between 5 °C and 43 °C
Effective temperature range
The refrigerator is designed to operate normally in the temperature range specified by its class rating.
Class
Extended Temperate
Temperate
Subtropical
Tropical
NOTE
The cooling performance and power consumption of the refrigerator may be affected by the ambient tempera-
ture, the door-opening frequency, and the location of the refrigerator. We recommend adjusting the temperature
settings as appropriate.
Refrigerator installation
ꞏ Confirm the sizes of your household door so as to make sure the refrigerator can pass through the door.
sizes of the refrigerator(Width*Depth*Height):546mm*610mm*1584mm.
ꞏ Remove all packing assemblies, including internal tape and foams on both sides of glass shelves of the
fridge, etc.
ꞏ Properly assemble the shelves for initial use by inserting the lugs on both sides into grooves on both
sides of inner liner in order for perfect positioning.
ꞏ The bottom padding foam of fridge must be removed for initial use.
1.If placement of the refrigerator is a little uneven, level of the
refrigerator can be adjusted by turning the leveling leg beneath
the cabinet (turning it counterclockwise to raise the height). In
lower part of the leveling leg there is an adjusting hole, through
which adjustment can be made by inserting simple tools like
a crosshead screwdriver. To protect surfaces of both sides,
protective film is applied to both sides of a new appliance before
delivery. If you are sure appearance of the appliance is free from
defects, you may remove the film for aesthetic purpose.
NOTE
ꞏ The refrigerator should be placed on a hard, level ground. Uneven
placement can cause noise and vibration.
ꞏ Placement on weak floor will strengthen the noise.
ꞏ Placement on carpet requires a solid backing plate, on which the
refrigerator stands to prevent color change of the carpet caused
by heat under the fridge or prevent the carpet from blocking heat
dissipation.
ꞏ For level and stable placement of the refrigerator, the leveling leg
must be pressed tightly against floor and the refrigerator is tilted
slightly backward for easy shut of the door.
6 English
Symbol
IEC 62552 (ISO 15502)
SN
+10 to +32
N
+16 to +32
ST
+16 to +38
T
+16 to +43
Ambient Temperature range(°C)
Up
ISO 8561
+10 to +32
+16 to +32
+18 to +38
+18 to +43
Down
Advertisement
