Table of contents 1. Safety information 2. Layout and items supplied (Figure 1) 3. Proper use 4. Technical data 5. Before starting the equipment 6. Operation 7. Replacing the power cable 8. Cleaning, maintenance and ordering of spare parts 9. Disposal and recycling 10.
Page 6
“Caution - Read the operating instructions to reduce the risk of inquiry” Wear ear-muff s. The impact of noise can cause damage to hearing. Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! Wear safety goggles.
• Inspect the equipment and accessories for Important! transport damage. When using equipment, a few safety precautions • If possible, please keep the packaging until must be observed to avoid injuries and damage. the end of the guarantee period. Please read the complete operating manual with due care.
Sound and vibration Residual risks Even if you use this electric power tool in Sound and vibration values were measured in accordance with instructions, certain resi- accordance with EN 60745. dual risks cannot be rules out. The following hazards may arise in connection with the LpA sound pressure level ....
Take care that the safety device is secure. Important! Only ever press the spindle lock when the Never use the angle grinder without the motor and grinding spindle are at a stand- guard. still! You must keep the spindle lock pressed while you change the wheel! 5.3 Test run for new grinding Wheels Allow the right-angle grinder to run in idle for at...
8. Cleaning, maintenance and Take special care that the grinding/sanding wheels are properly stored and transported. ordering of spare parts Ensure that the grinding/sanding wheels are never exposed to shock, jolts or sharp edges (for Always pull out the mains power plug before star- example during transport or storage in a toolbox).
9. Disposal and recycling The equipment is supplied in packaging to pre- vent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic.
Page 12
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the iSC GmbH. Subject to technical changes - 12 - Anl_TE_AG_115_750_DP_SPK7.indb 12 Anl_TE_AG_115_750_DP_SPK7.indb 12 05.09.2017 10:34:53 05.09.2017 10:34:53...
Page 13
Service information We have competent service partners in all countries named on the guarantee certifi cate whose contact details can also be found on the guarantee certifi cate. These partners will help you with all service re- quests such as repairs, spare and wearing part orders or the purchase of consumables. Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.
Page 14
Warranty certifi cate Dear Customer, All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card.
Need help?
Do you have a question about the TE-AG 115/750 DP and is the answer not in the manual?
Questions and answers