Parts Name; Base Assembly - Pelonis FT30-16J Owner's Manual

PARTS NAME

BASE ASSEMBLY

1. Match locking tab to base and click into position.
2. Turn the lock bolt colockwise to secure the base(Fig.1).
ASSEMBLY OF BLADE AND GUARD
1. Take the Spinner out from the bag, then remove the plastic nut by turning
it counterclockwise.
2. Set the rear guard in the proper position with the handle up.
3. Screw on plastic nut tightly to attach guard.
4. Install the blade onto the shaft until the retaining pin fits into the notch on
the blade.
5. Screw spinner on to motor shaft counterclockwise.
6. Mount the Front Guard and join both Guards together using the Clips.
OPERATION INSTRUCTIONS
Speed control
Speed is controlled by the button switch
0--Off 1--Low
Oscillation control
To make the fan oscillate, push down on the oscillation knob located on the top
of the motor housing. To stop the fan from oscillating in the position desired,
push on the oscillating knob once more.
Tilting control
The airflow can be adjusted upward or downward by tilting the fan head to a
vertical angle as desired.
Front Guard
Spinner
2---Medium 3---High
Plastic Nut
Rear Guard
Blade
Motor Shaft
Piano-key
unscrew
2
Oscillating
Fan Body
Base
lock bolt
Fig.1