Table of Contents
Advertisement
Network Interface Panel
About the Control Panel
Menu List
Environment menu
Item
Network
Maintenance
Display menu
Item
Language
Brightness
Contrast
Restore settings
Energy saving menu
Item
Power Off Timer
Sleep
Restore settings
Network menu
Note:
This is not displayed if a password is set for this panel in EpsonNet Config.
User's Guide
About the Control Panel
You can check network settings such as the MAC address and IP address.
You can check the number of scanned sheets. If the scanner being used has an Automatic
Document Feeder installed, you can check or reset the number of scanned sheets for the Roller
Assembly Kit, Pickup Roller, Separation Pad, and Separation Roller.
Specifies the language displayed on the LCD panel.
Adjusts the brightness of the LCD panel. Use the u and d buttons to set the contrast between -2
(darker) and +2 (brighter).
Adjusts the contrast of the LCD panel. Use the u and d buttons to set the contrast between -2
(lowest contrast) and +2 (highest contrast).
Select Yes and then press the Z button to return the settings in the Display menu to their default
values.
Specifies the length of time before the scanner enters power off mode if no operations are made.
Specifies the length of time before the scanner enters sleep mode if no operations are made.
Select Yes and then press the Z button to return the settings in the Energy saving menu to their
default values.
Description
Description
Description
21
Advertisement
Table of Contents
