Connecting To An Ipv4 Network Manually - Epson B12B808411 User Manual

Network Interface Panel
B
When the home screen ("Scanner is ready") is displayed, press the F setting button.
C
Select Network with the u up and d down buttons, and then press the Z button.
D
Select IPv4 with the u up and d down buttons, and then press the Z button.
E
Select Auto with the u up and d down buttons, and then press the Z button.
F
Press the F setting button to return to the home screen.
G
After "Configuring network setting" is displayed, restart the panel.
Set the password for protecting network security using Web-based EpsonNet Config.
"Using EpsonNet Config" on page 14
U

Connecting to an IPv4 Network Manually

A
Turn on your scanner.
User's Guide
Setting Up the Network Interface Panel
12