Yamaha 301 Owner's Manual page 81

3
Press the [MIXING CONSOLE] button repeatedly to call up the MIX-
ING CONSOLE display for the relevant parts.
The MIXING CONSOLE displays actually consist of several different
part displays. The part name is indicated at the top of the display. The
various MIXING CONSOLE displays alternate among the following:
PANEL PART display → STYLE PART display → SONG CH 1–8 display →
SONG CH 9–16 display
4
Press one of the [A]–[J] buttons to select the desired parameter.
5
Use the [1 π † ]–[8 π
π † π †
π †
6
Save your MIXING CONSOLE settings.
• Saving the PANEL PART display settings
Register them to Registration Memory (page 121).
• Saving the STYLE PART display settings
Save them as Style data.
1 Press the [DIGITAL RECORDING] button.
2 Press the [B] button to call up the STYLE CREATOR display.
3 Press the [EXIT] button to close the RECORD display.
4 Press the [I] (SAVE) button to call up the Style Selection display for sav-
ing your data, then save it (page 63).
• Saving the SONG CH 1–8/9–16 display settings
First register the edited settings as part of the Song data (SET UP), then save
the Song.
See the SONG CREATOR → CHANNEL display → SETUP item explana-
tion on page 152.
About Parts
PANEL PART
In the PANEL PART display of the MIXING CONSOLE, you can indepen-
dently adjust the level balance among the Keyboard parts (RIGHT 1, RIGHT
2 and LEFT), SONG, STYLE, and MIC (CVP-305/303) parts. The part compo-
nents are the same as those that appear in the display when you press the
panel [BALANCE] button.
STYLE PART
A Style consists of eight separate channels. Here you can adjust the level
balance among these eight channels or parts. These part components are the
same as those that appear in the display when you press the panel [CHAN-
NEL ON/OFF] button to call up the STYLE display.
SONG CH 1–8/9–16
A Song consists of sixteen separate channels. Here you can adjust the level
balance among these sixteen channels or parts. These part components are
the same as those that appear in the display when you press the panel
[CHANNEL ON/OFF] button to call up the SONG display.
† ] buttons to set the value.
π † π †
π †
Editing the Volume and Tonal Balance (MIXING CONSOLE)
CVP-305/303/301 Owner's Manual
About Parts
See below.
Instantly setting all parts to
the same value
Once you've selected a parame-
ter in step 4, you can instantly
set the same value to all other
parts. To do this, simultaneously
hold down one of the [A]–[J] but-
tons, and use the [1]–[8] buttons
or the [DATA ENTRY] dial.
81