Yamaha 2 EZ-AG Owner's Manual page 9

r [TUNING] Button
Allows overall tuning of the EZ-AG in semitone
increments, as well as selection of one of the EZ-
AG's alternative tunings: in addition to standard gui-
tar tuning the EZ-AG provides drop-D, open-D,
open-G, and open-E tunings.
t [TEMPO] Button
Allows the song tempo to be set from q=32 through
q=280.
y [CAPO] Button
Allows the position of the EZ-AG's "virtual capo" to
be specified.
q Power Switch ([STANDBY/ON])
This is the EZ-AG power switch. Press the switch in
to turn the power ON. Press the switch again to return
it to the extended STANDBY position and turn power
off.
w DC IN 12V Jack
The AC Power Adaptor (PA-3C) can be connected
here.
• Make sure that power to all external devices is OFF when
connecting the EZ-AG to avoid possible electric shock and
damage to the equipment. Also, start with all volume con-
trols turned down to minimum to prevent possible damage
to speakers and other playback equipment.
Names Of the Parts, Controls, and Connectors
u [SONG] Button
Allows any of the 25 internal songs to be selected for
playback. In addition to the songs initially provided,
songs downloaded from the internet to a computer
can be read into and stored in the EZ-AG.
i [SOUND] Button
Allows selection of any of the EZ-AG's 20 instru-
ment sounds.
o [DEMO] Button
Starts and stops song playback.
!0 [STRUM], [CHORD], [BOTH] Buttons
Starts playback of the selected song using the corre-
sponding playback method.
Connector & Power Switch Section
q w e
e PHONES/OUTPUT Jack
This jack can be used to connect a pair of stereo
headphones for private practice or listening, or to
connect the EZ-AG to an audio system, television, or
instrument amplifier.
r MIDI IN/MIDI OUT Connectors
These connectors can be used to connect the EZ-AG
to other MIDI gear or a computer using standard
MIDI cables.
r
9
EZ-AG