Connections - Yamaha 2 EZ-AG Owner's Manual

Connections

Refer to "Connecting To a
Computer" on page 21
for connection details.
Computer
USB-MIDI Interface
USB
Connector
• Make sure that power to all external devices is OFF when connecting the EZ-AG
to avoid possible electric shock and damage to the equipment. Also, start with all
volume controls on external devices turned down to minimum to prevent possi-
ble damage to speakers and other playback equipment.
I Using Headphones• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
For private practicing and playing without dis-
turbing others, connect a set of stereo head-
phones to the PHONES/OUTPUT jack. Sound
from the built-in speaker system is automati-
cally cut off when you insert a headphone plug
into this jack.
I Connecting To an External Amplifier or Stereo System • • • • •
Though the EZ-AG is equipped with a built-in
speaker system, you can also play it through an
external amplifier/speaker system. First, make
sure the EZ-AG and any external devices are
turned off, then connect one end of a stereo
audio cable to the LINE IN or AUX IN jack(s)
of the other device and the other end to the
PHONES/OUTPUT jack on the EZ-AG.
I Using the MIDI Terminals • • • • • • • • • • • • • • • • • • • • • • • • • • •
The EZ-AG also features MIDI terminals,
allowing you to interface the EZ-AG with other
MIDI instruments and devices.
MIDI OUT Connector
MIDI IN Connector
PHONES/OUTPUT
Connector
Stereo
Phone Plug
EZ-AG
AC Power Adaptor
Standard
Phone Plug
DC IN 12V
Connector
RCA Pin Plugs
Stereo System
MIDI
instrument
Setting Up
To AC wall socket
Headphones
Powered Speaker
Audio System,
Television, etc.
11
EZ-AG