Table of Contents
Advertisement
About Advanced Features & Operation
CALIBRATION - Under normal circumstances it will not be necessary to
adjust the calibration of the temperature sensor. If calibration is required,
please contact a trained HVAC technician to correctly perform the
following procedure.
Place the thermostat in the OFF mode
1
by pressing the MODE button.
Press and hold the MODE button. While
2
holding the MODE button, press and
hold the DOWN button for 5 seconds.
All icons will appear on the display.
Press the MODE button once. The
3
thermostat temperature will be displayed
and may be calibrated using the UP or
DOWN buttons.
After calibration is complete, press the
4
MODE button once to save your changes
and return to normal operation.
MODE
MODE
MODE
MODE
13
Setup
SuMoTuWeThFrSa
Fan On
Locked
Advertisement
Table of Contents
