Yamaha M7CL StageMix V1.5 User Manual
Ipad app for the yamaha m7cl v3 digital mixing console
Hide thumbs
Also See for M7CL StageMix V1.5:
- Owner's manual (312 pages) ,
- User manual (51 pages) ,
- Quick start manual (24 pages)
Table of Contents
Advertisement
Quick Links
M7CL StageMix V1.5 User Guide
Welcome:
Thank you for downloading the "M7CL StageMix" iPad app for the Yamaha M7CL V3
digital mixing console. Via a wireless access point, StageMix can control any variant
of M7CL console so long as it is running V3 or higher firmware.
The latest firmware version for M7CL can be downloaded from
www.yamahaproaudio.com
StageMix provides remote control of M7CL functions via a simple, intuitive
graphical interface from anywhere within wireless range. The software has
been specifically designed to allow engineers to adjust monitor mixes from
the performers' positions on stage, directly controlling mix parameters via the
iPad rather than having to rely on verbal directions to a second engineer.
The result is better mixes in less time: a huge advantage during high-pressure
pre-show setup.
StageMix does not provide remote control of all M7CL
parameters, but is focused on the requirements for adjusting monitor mixes on
stage.
Advertisement
Table of Contents
Related Manuals for Yamaha M7CL StageMix V1.5
Summary of Contents for Yamaha M7CL StageMix V1.5
- Page 1 M7CL StageMix V1.5 User Guide Welcome: Thank you for downloading the “M7CL StageMix” iPad app for the Yamaha M7CL V3 digital mixing console. Via a wireless access point, StageMix can control any variant of M7CL console so long as it is running V3 or higher firmware.
-
Page 2: Table Of Contents
Yamaha Commercial Audio CONTENTS System Requirements WiFi Settings Getting Started M7CL Network Setup iPad Settings StageMix Setup 3.3.1 Offline Demo Mode 3.3.2 Configure StageMix to Work with an M7CL 3.3.3 Select a Mixer and Begin Working StageMix Operation Mixer Window 4.1.1 Channel Names... -
Page 3: System Requirements
Yamaha Commercial Audio 1.0 System Requirements • Apple iPad (any model) • Yamaha M7CL digital mixing console with V3 or higher firmware (any model, including M7CL-48, M7CL-32, M7CL-48ES) • WiFi access point (preferably with 802.11n, 5GHz capability, though 2.4GHz and 802.11g will also work) •... -
Page 4: Getting Started
Yamaha Commercial Audio 3.0 Getting Started M7CL Network Setup I. Connect the WiFi access point to the M7CL’s network port via a CAT5 cable. Note that a cross-over cable will be needed with older access points that don’t have the “auto MDIX” function. Most recent devices will support “auto MDIX”, in which case a straight CAT5 cable can be used. -
Page 5: Stagemix Setup
Yamaha Commercial Audio c. Press the blue circle with the white arrow to the right of the selected network to edit the IP address. d. Select [Static]. e. Write an IP Address similar to the one for the M7CL, but with just the last number different. -
Page 6: Offline Demo Mode
Yamaha Commercial Audio • Select an M7CL console that has already been configured to work with your iPad and begin using StageMix. 3.3.1 Offline Demo If [Offline Demo] is pressed in the “Select Mixer” screen, all the functions of “StageMix” will operate independently of any mixing console. It is a useful way to demonstrate and learn how to use the app without the need for a mixer. -
Page 7: Select A Mixer And Begin Working
Yamaha Commercial Audio iv. Enter the M7CL MAC address noted in 3.1. When entering the MAC Address, the colons between sets of characters will be automatically added by StageMix. v. Press the [ADD MIXER] button at the bottom of the screen 3.3.3 Select a Mixer and Begin Working... -
Page 8: Stagemix Operation
Yamaha Commercial Audio 4.0 StageMix Operation Mixer Window The main page of the StageMix is called the “Mixer” window. It shows the EQ curve, CUE and ON buttons, fader and level meters, and channel names for eight adjacent channels. Across the top of the screen, all Input, Mix and Matrix level meters and faders are displayed in blocks of eight. -
Page 9: Faders
Yamaha Commercial Audio 4.1.2 Faders Each fader has its channel number displayed on its cap. The fader cap must be touched to allow the level to be adjusted. The fader will not “jump” or “ramp” to a new position on the slider. When a fader cap is touched, its background will lighten and its current dB value will be displayed. -
Page 10: Setup
Yamaha Commercial Audio SETUP Press the [SETUP] button below the StageMix logo to open a new window which allows user preferences to be selected. iPad Status Bar The iPad’s Status Bar is visible in this screen, allowing the WiFi signal strength and the battery charge status to be viewed. -
Page 11: Long Faders
Yamaha Commercial Audio Long Faders Press the [LONG FADERS] button at the bottom-left corner of the Mixer window to allow more accurate adjustment of the currently selected fader block. In this view, EQ curves and the Navigation/Meter Bridge are not visible. -
Page 12: Sends On Faders
Yamaha Commercial Audio SENDS ON FADERS Press the [SENDS ON FADERS] button in the left column of the Mixer Overview to access sends to Mix and Matrix busses. A large button will appear to show the currently selected Mix or Matrix, and its name. -
Page 13: Mix Sends On
Yamaha Commercial Audio The currently selected Mix will appear as a white button with a check mark. Stereo pairs appear as single large buttons. 4.4.1 Mix Sends ON In SENDS ON FADERS mode, the [ON] button in each channel strip is used to turn On/Off the Mix Send from each channel to the currently selected target Mix/Matrix bus. -
Page 14: Parametric Eq Editing Screen
Yamaha Commercial Audio Changing the EQ Curve Display between PEQ and GEQ On any channel displaying both a green and blue dot below the EQ curve, the user can select either of those EQ types to be displayed by using a swipe gesture in the EQ curve area. - Page 15 Yamaha Commercial Audio M7CL StageMix User Guide V1.5 Note: the In/Out meters display the levels going In and Out of the EQ section. One band of Parametric EQ can be adjusted at a time. Press one of the green circles to select the band, and it will be highlighted yellow. EQ bands in...
-
Page 16: Hpf
Yamaha Commercial Audio 4.6.1 HPF When the HPF is selected, an extra [HPF] button appears at the top of the EQ graph. Press this button to switch the HPF on/off. When the button is green, the HPF is On. HPF has no Gain or Q parameter: only frequency. -
Page 17: Graphic Eq Editing Screen
Yamaha Commercial Audio Graphic EQ Editing Screen GEQ Overview In the upper portion of the GEQ Editing Screen, the complete GEQ curve is displayed along with the gain positions for all 31 bands. White dots represent the position for each of the 31 bands. (These dots change to yellow and become larger when they are being touched in the Editing section below.) -
Page 18: Geq Type
Yamaha Commercial Audio 4.7.3 GEQ Type Next to the Rack position, the type of GEQ is identified as either “31 Band” or “Flex 15”. In the case of a Flex 15 GEQ, a larger number indicates the remaining number of available bands for that GEQ. As each band is adjusted away from 0dB, the number of available bands will decrease. -
Page 19: Troubleshooting
Yamaha Commercial Audio 5.0 Troubleshooting No WiFi Available If this message appears after launching StageMix, this indicates that the iPad is not connected to a WiFi access point or that WiFi may be switched off in the iPad. Refer to sections 2.0 and 3.2 for details about configuration and iPad WiFi settings. -
Page 20: Connection Lost
Yamaha Commercial Audio Connection Lost If StageMix loses its connection to the M7CL, the following message will appear. Operation of StageMix is not possible while this message box is onscreen. StageMix will automatically attempt to reconnect to the M7CL. If this is successful, StageMix will re-synchronize with the console data and operation will become available again.