Others - Attention; Product Warranty - Fabit E Series User Manual

Vacuum deficiency
Pumping needle tube "O" joint
Oil pumping
sealing ring damage
speed is slow
Air leakage
11.

Others - Attention

1）The air pressure used in the discharge of oil is 1 bar;
2）Is Prohibit the use of transparent cups and contact with water, aldehydes and ketones or
other corrosive solvent；
3）try not to set too full cup of oil (oil volume is close to 3/4), so as not to affect the pumping
speed; ；
4）Lack of equivalent cup or the tank vacuum pressure, pumping speed, the vacuum cup or
tank to continue pumping；
5）after the completion of the discharge of oil, the lower part of the tank outlet pipe valve
must be closed; ；
6） The equipment outside must be clean, can only use a soft cloth and neutral cleaning, do not
rub with a hard object or corrosive and flammable liquid contact with the surface of the
machine；
7）when the machine is in trouble, please contact the vendor or manufacturer.

12. Product Warranty

1）Warranty provisions
During the warranty period, under full compliance with this operating instructions and
procedures, and the ones on the labels of the machine, the company is responsible for free repair
and replacement of parts and send replacement parts.
2) Failure occurred in the following circumstances, does not belong to the scope of the warranty.
1. Due to improper use, inspection, custody and other work negligence, and the
occurrence of failure and damage.
2. Due to random change (transformation), the structure of the product has a bad effect,
so the failure and damage.
3. Due to the natural wear of consumables, those ones need to be replaced.
4. Fault and damage caused by fire, typhoon, earthquake, disasters and other external
reasons.
5. Failure and damage due to non specified components.
6. The warranty procedures are not complete. (example: no contact with the vendor, etc.)
Accessories, such as: hose type, sealing ring, rubber parts are natural consumables, they do not
ADD: Huli Industrial Zone, NO.4 Xinwei Industrial Estate, Gongming Office, Guangming District, Shenzhen , China.
TEL: 86 0755 61136563 FAX: 86 0755 27125016
SHENZHEN FABIT M&E EQUIPMENT CO. LTD.
E-mail:
Reach the specified value of the
vacuum
Contact vendor for replacement
Contact with the vendor, to
determine the location of the
leak under guidance
fabit@vip.163.com WEBSITE: http: //www.fabit.cn 12