Tilting
You can set the EMX unit at an angle, as shown below.
Rack Mounting
To prepare the unit for rack mounting, use the (separately sold) RK512 rack mount kit.
If rack-mounting the unit, be sure to maintain adequate ventilation so the unit does not overheat. Consider attaching a vent panel,
and do not use a sealed rack.
The EMX unit requires 7U of rack space.
NOTE
RK512 Rack mount Kit
Fittings
■ How to install the rack-mount hardware
1
Turn the EMX unit upside down.
Horizontal Orientation, Tilting and Rack Mounting
2
Using the kit's 4 screws, attach the kit's 2 metal fittings
as shown below.
Screws
3
Turn the EMX right-side up.
Do not push too forcefully when tilting the unit. Excess
force may cause the unit to topple or turn, potentially
resulting in equipment damage or in injury to bystand-
ers.
EMX512SC/EMX312SC/EMX212S
29