Introduction; General Information - MPI Ultrasonic generator Manual

INTRODUCTION

Dear Customer,
Thank you for your purchase of the product.
This ultrasonic SONOWELD-generator has been developed using the latest technologies to allow for greater
overall performance and stability.
Please read and follow these operating instructions carefully before installing or commissioning your
product. As with any electrically powered device, failure to observe these instructions can present a risk to
life.
The device may only be operated and maintained by personnel who have read and understood
this operating manual and are familiar with the applicable legal regulations for accident prevention and
workplace safety. Failure to comply with this will result in a loss of warranty rights.

General information

This ultrasonic generator is a device which is used for ultrasonic plastic- and metal-welding applications as well
as for different special applications such as: Sieving, atomizing, etc.
The main features are:

Autotuning circuit to tune automatically to the resonant frequency of the connected horn.

Fully digital frequency generation.

High speed microcontroller to control all functions of the generator.

LCD-display with rotary encoder

Modbus on all generators

Constant / adjustable amplitude 0 – 100 %

Protected against : Short circuit
Overtemperature
Overload