Niigata seiki D IP67S Series Instruction Manual

DIGITAL S­LINE CALIPER
Precision
Measuring Tool
Thank you for purchasing Niigata Seiki Digital S-Line Caliper.
This caliper is IP-67 rated for water and dust resistance, and can be used in applications where it will be exposed to water,
cutting fluid, lubricating oil, etc.
For safe and proper use, please read this instruction manual before use and follow the procedures described.
●
Please keep manual where it is accessible to user for future reference.
●
Keep this manual with the instrument if transferred or leased to a third party.
●
For inquiries about this product, please contact dealer or Niigata Seiki at the address listed on the following page.
■ PARTS IDENTIFICATION ・ FUNCTION
⑤
Inside Meas.
Surfaces
④
Inside Jaws
③
Step Meas.
Surfaces
②
Outside Jaws
①
Outside Meas.
Surfaces
①
Outside Meas. Surfaces ··
②
Outside Jaws ··················
③
Step Meas. Surfaces ······
④
Inside Jaws ·····················
⑤
Inside Meas. Surfaces ·····
SAFETY PRECAUTIONS
To prevent harm to yourself or others, and to prevent damage to
property, always follow the procedures marked by the following symbols.
WARNING:
Read the manual and follow the directions.
・Use of product other than as described in this manual may
cause accident.
Use only for measuring.
・
Use for any purpose other than measuring may damage or
wear the instrument. Improper use may also cause accident.
Handle with Care.
Do not drop or subject instrument to excessive shock. Do not
・
place under heavy objects. Improper handling may
cause damage or poor accuracy.
・ Do not scratch instrument, for example by writing ID number.
Avoid using in high electric fields, such as near
fluorescent lights or switching power supplies.
・ Incorrect value may be displayed on LCD.
CALIBRATION
●To maintain instrument accuracy, periodic calibration is
recommended.
Wear of measuring surfaces from repeated use may affect accuracy
and periodic accuracy checks should be performed.
LCD Display
⑩
⑨ Lock Screw
m m
SWISS MADE
MODE SET
⑫[SET]Button
Position object to be measured
between these surfaces.
For measuring outside dimensions.
Measures height of steps.
For measuring inside dimensions.
Position surfaces inside object to
be measured.
Indicates risk of personal injury or property damage if not followed.
Instruction Manual
MICROMETER MCD-***IP6 7 S
CALIPER D-***IP6 7 S
⑧ Scale
⑪
Battery Cover
⑥ Depth Bar ················
⑦ Depth Meas. Surf. ····
⑧ Scale ························
⑨ lock Screw ···············
⑩ LCD Display ·············
⑪ Battery Cover ···········
⑫ [SET]Button ············
⑬ Battery Cover Tool ·········
Please Observe
Denotes a prohibition –
You MUST NOT do
Use and store only in environment meeting the following
conditions:
●
Dry location protected from rain, water, and oils.
● Location that is not excessively hot.
● Location protected from use by children and unauthorized
people.
・
Use in places contrary to the above may cause damage to
the product resulting in accident or injury.
Jaw Tips Are Sharp—Handle With Care.
・
Careless handling may cause injury.
Do not disassemble or modify.
・
Disassembly may damage product or cause accident.
For repair, please contact distributor or place of purchase.
Do not write on instrument with electric engraver.
・
Do not engrave instrument body or jaw, such as an ID number
with engraver or electric pen.
Outside Japan,
Please contact distributor or place of purchase to
inquire about calibration services.
Model D-***IP67S<
No.
⑬ Battery Cover Tool
※D­150IP67S・D­200IP67S only
⑥
IP67
⑦
For measuring depth.
Depth is measured between these two
surfaces.
Supports LCD Display Unit.
Tighten to prevent the slide and display
from moving.
Displays digital measurement.
Open to access Battery.
Power ON/OFF, Set 0-point, Sleep Mode.
Used to open and close Battery Cover ⑪.
Denotes a requirement –
You MUST do
>
comb.
Depth Bar
Depth Meas.
Surfaces