Instrument And Control Functions; Indicator And Warning Lights - Yamaha FJR1300 Owner's Manual

1. Left turn signal indicator light "
2. Right turn signal indicator light "
3. Neutral indicator light " "
4. High beam indicator light "
5. Oil level warning light " "
6. Engine trouble warning light "

Indicator and warning lights

Turn signal indicator lights
" " and " "
The corresponding indicator light flash-
es when the turn signal switch is
pushed to the left or right.
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.

INSTRUMENT AND CONTROL FUNCTIONS

High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Oil level warning light "
This warning light comes on when the
engine oil level is low.
"
The electrical circuit of the warning light
"
can be checked according to the fol-
"
lowing procedure.
1. Set the engine stop switch to "
"
and turn the key to "ON".
EAU03034
2. Shift the transmission into the neu-
tral position or pull the clutch lever.
3. Push the start switch. If the warning
EAU04121
light does not come on while push-
ing the start switch, have a Yamaha
dealer check the electrical circuit.
NOTE:
_
Even if the oil level is sufficient, the
warning light may flicker when riding on
EAU00061
a slope or during sudden acceleration
"
or deceleration, but this is not a mal-
function.
_
EAU00063
" Engine trouble warning light "
This warning light comes on or flashes
when an electrical circuit monitoring
the engine is defective. When this oc-
curs, have the Yamaha dealer check
EAU03201 the self-diagnosis system.
"
The electrical circuit of the warning light
can be checked according to the fol-
lowing procedure.
1. Set the engine stop switch to "
2. Turn the key to "ON". If the warn-
"
3-2
ing light does not come on, have a
Yamaha dealer check the electri-
cal circuit.
EAU03192
"
3
".