Memory Buffer Configuration - Yamaha PLG100-DX Owner's Manual

Memory Buffer Configuration

The memory buffer of the PLG100-DX is configured as shown in the diagram below.
18
Voice Edit Buffer
Compare
Edit Recall
Edit Recall Buffer
• The only voices that can be edited using an editing program like the DX Simulator are the custom
voices.
When using the custom bank
• The following parameters are not valid when using the custom bank because they are saved as voice
parameters.
XG Native Part Parameters
MONO/POLY MODE
BEND PITCH CONTROL
PORTAMENTO SWITCH
PORTAMENTO TIME
PLG100-DX Native Part Parameters
PitchBend Step
Portamento Step
Portamento Mode
However, MONO/POLY MODE, BEND PITCH CONTROL, PORTAMENTO SWITCH, and
PORTAMENTO TIME are received through CC (Control Change). (When changing to another cus-
tom bank voice, that voice will be set to the saved parameters.)
• If an XG System On is received, or part assignment is changed, the custom voices will be initialized, but
the 64 voice VMEM and AMEM areas will not be initialized.
Preset Memory
Recall
(912 Voices)
Custom Voices
(64 Voices)
Store