Trane AquaStream 2 CGWN Series Installation Operation & Maintenance page 23

CG-SVX06F-GB
Installation
When ordered, the outdoor air
temperature sensor and associated
electronics are factory-mounted
and wired in the control panel of
the chiller. This sensor has to be
installed outdoors to allow for proper
Figure 10 - Outdoor ambient air sensor connection (self-thread screw)
Figure 11 - CGWN and CCUN main power supply connection (205-211)
operation of the chiller. The wiring of
the sensor has to be performed with
a 2 wires cable of 0.75 to 1.5 mm²
type H05WWF or equivalent. The
maximum length of this cable is 305
m. (see Figure 10). The IPC bus is
factory-wired.
Self-thread screw
1Q10
L1
L2
L3
23