Download Print this page

Blue Ox BX2239 Installation Instructions Manual

2006-10 honda ridgeline

Advertisement

Quick Links

Please read BOTH these Installation Instructions and the General
Instructions before attempting to install or operate this equipment.
®
1. Blue Ox
towing products and accessories
are intended to be installed by Blue Ox
Dealers who are familiar with our products and
have the equipment necessary and knowledge
to do "fi t work". When necessary Blue Ox
Dealers can be found at
by contacting our Customer Care
Department at (402) 385-3051.
2. Many Blue Ox
®
Baseplates are designed to
use existing holes and hardware to mount
the baseplate to the towed vehicle. Even
though bolts are there, do not assume they
are adequate for baseplate mounting. Always
use hardware supplied in the hardware kit
and existing hardware specifi ed in the
Baseplate Installation Instructions.
Confi rm the towability and pre-towing
procedures for your vehicle with
the owner's manual or contact the
vehicle's manufacturer for specifi c
towing procedures.
If the front of your vehicle looks different
If the front of your vehicle looks different
than this, call us at (402) 385-3051.
than this, call us at (402) 385-3051.
2006-10 Honda
Installation Instructions
®
®
www.blueox.com
or
BX2239
Ridgeline
Attachment Tab Height:
Attachment Tab Width:
Bolt Torque Specifi cations
Torque in Foot-Pounds for Metric Bolts
Bolt Size Grade 8.8 Grade 10.9
6MM
8MM
10MM
12MM
14MM
Bolt Torque Specifi cations
Torque in Foot-Pounds for Inch Bolts
Bolt Size
Grade 5
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
WARNING
!
Failure to read and follow these instructions
could result in separation of the towed vehicle
from the tow bar, causing property damage,
loss of towed vehicle, personal injury or death.
Page 1 of 8
26 1/4"
25"
6
8
16
22
31
40
54
70
89
117
Grade 8
10
14
19
29
33
47
54
78
78
119
154
230
292-2726 Rev. C
7/20/10

Advertisement

loading
Need help?

Need help?

Do you have a question about the BX2239 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Blue Ox BX2239

  • Page 1 25” Dealers who are familiar with our products and have the equipment necessary and knowledge ® to do “fi t work”. When necessary Blue Ox Dealers can be found at www.blueox.com Bolt Torque Specifi cations by contacting our Customer Care Torque in Foot-Pounds for Metric Bolts Department at (402) 385-3051.
  • Page 2: Installation Instructions

    (In most cases it will be Grade 5, please reference the parts list above). Replacement parts may be ordered through your nearest Blue Ox® Dealer or Distributor, or call our Customer Care Team at (402) 385-3051. Failing to follow and/or altering these installation instructions in either installation or required equipment will void the manufacturer’s warranty.
  • Page 3 BX2239 2006-10 Honda Ridgeline Installation Instructions Attachment Tabs: Installation Instructions: Due to the design of the removable tabs, the RangeFinder II and Ambassador tow bars can not be used. Adapters, except the BX8833 and the BX88151, can not be used with this baseplate.
  • Page 4 BX2239 2006-10 Honda Ridgeline Installation Instructions 3. Just forward of the front tire, on the outermost 4. Using a 10MM socket, remove three metric bolts bottom edge of fascia, remove two metric bolts that run horizontally along the bottom of fascia, using a 10MM socket.
  • Page 5 BX2239 2006-10 Honda Ridgeline Installation Instructions 8. Using a Phillips screwdriver, remove the screw. Do 7. Remove this bolt on the side. Do this to both sides this to both sides of the vehicle. of the vehicle. Set bolts aside to reinstall later.
  • Page 6 BX2239 2006-10 Honda Ridgeline Installation Instructions 12. Using a vice grip; clamp the rear of the baseplate 11.Slide metal bumper back on to the frame rail, to the webbing. Using the baseplate as a template, guiding the baseplate on top of frame rail. Align drill into the frame rail through the three baseplate with the existing holes of the bumper bracket.
  • Page 7 Install the tow bar and safety cables according to their instructions. When demonstrating this to the customer, be sure to include all of the Blue Ox packaging and contents. 18. Just outside the driver’s side radiator, trim the air dam up 1 1/2”, follow the top of the ridge all the...
  • Page 8 BEFORE Installing the fascia. CUSTOMER SERVICE COMMITMENT DEALER OR INSTALLER: Blue Ox is committed to providing you with exceptional customer care throughout your lifetime Be certain the user receives the with our products. Our team is here to assist you instruction sheets for their products.