Table of Contents
Advertisement
The sliding supports can only be used on shelf positions 1,2 and 3.
When fitting the sliding shelf supports, make sure that you fit:
• the slides to the top wire of a rack. They do not fit on the lower wire.
• the slides so that they run out towards the oven door, as shown in Fig. 57.
• both sides of each pair of shelf slides.
• both sides on the same level. Note: you cannot fit the sliding shelf supports to the top shelf
position.
Fig.79 Removing the sliding shelf supports
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Dual_Fuel/OR60SDBGFX2/User_Guide_OR60SDBGFX...
Fig.80 Re tting the sliding shelf supports
Updated: Wed, 07 Oct 2020 12:30:37 GMT
Powered by
6
Advertisement
Table of Contents
