Panasonic SF4C Series Quick Instruction Manual page 38

● I/O circuit diagrams
<For PNP output>
Terminal No.
Emitter
(Brown) +V
(Pink) Test input / Reset input
(Pale purple) Interlock setting input
(Yellow) Override input
(Red) Muting lamp output
(Gray) Safety input 1
(Gray / Black) Safety input 2
(Yellow-green / Black) Auxiliary output
(Shield) Output polarity setting wire
(Blue) 0V
(Orange) Synchronization +
(Orange / Black) Synchronization -
Internal circuit Users' circuit
Receiver (Orange / Black)
Synchronization -
(Orange) Synchronization +
(Brown) +V
(Gray) Large multi-purpose indicator input 1 (Note 2)
(Gray / Black) Large multi-purpose indicator input 2 (Note 2)
(Sky-blue / White) Muting input 1
(Sky-blue / Black) Muting input 2
(Yellow-green) External device monitor input
(Black) Control output 1 (OSSD 1)
(White) Control output 2 (OSSD 2)
(Shield) Output polarity setting wire
(Blue) 0V
Internal circuit Users' circuit
* S1, S2
● Switch S1
Test input / Reset input
For manual reset: Vs to Vs - 3.5V (sink current 5mA or less): OFF (Note 2), Open: ON
For auto reset: Vs to Vs - 3.5V (sink current 5mA or less): ON (Note 2), Open: OFF
● Switch S2
Override input, Interlock setting input, Large multi-purpose indicator input 1 / 2, Muting input 1 / 2 and
External device monitor input
Vs to Vs - 3.5V (sink current 5mA or less): Valid (Note 3), Open: Invalid
Notes: 1) The incandescent lamp or LED with total 1.5 to 6W or less shall be used when connecting lamp to the
muting lamp output.
2) Large multi-purpose indicator lights up in red when connecting large multi-purpose indicator input 1
wire (gray) and +V, and large multi-purpose indicator lights up in green when connecting large multi-
purpose indicator input 2 wire (gray / black) and +V.
3) Vs is the applying supply voltage.
<Reference>
K1, K2: External device (Forced guided relay or magnetic contactor)
38
Color code
*S1 *S2
*S2
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
*S2
(Note 1)
+
-
Load
*S2 *S2 *S2
K1
K2
K1
K2