Mounting And Installation; Configuration - Pepperl+Fuchs HiC2883 Manual

Functional Safety HiC2883

Mounting and Installation

4 Mounting and Installation
Installing the device
1. Observe the safety instructions in the instruction manual.
2. Observe the information in the manual.
3. Observe the requirements for the safety loop.
4. Connect the device only to devices that are suitable for this safety application.
5. Check the safety function to ensure the expected output behavior.
4.1

Configuration

Note!
The device configuration via DIP switches is not safety relevant.
Configuring the Device
The device is configured via DIP switches. The DIP switches for setting the safety
functions are on the side of the device.
1. De-energize the device before configuring the device.
2. Remove the device.
3. Configure the device via the DIP switches.
4. Secure the DIP switches to prevent unintentional adjustments.
5. Mount the device.
6. Connect the device again.
Note!
See corresponding datasheets for further information.
14