Ipsec/L2Tp - Caimore CM520-6X Series User Manual

28

4.3.2 IPSec/L2TP

4.3.2.1 IPSec
 Connection Mode:
Initiative: the connection is initiated by local side.
Passivity: wait for a connection.
 Remote Address: IP address of peer side.
 Transport Mode:
Transport: usually used in the connection between router and server.
Tunnel: usually used in the connection between two routers.
Passthrough: it allows IPSec protocol to pass through.
 Local Endpoint Type:
Network to Network: used in the communication between devices connected to
router and server.
Road Warrior: connect to server as a mobile client.
 Subnet: If the "Local Endpoint Type" is "Network to Network", it's the subnet of two
sides.
 Next Hop IP: If the device is in LAN, this parameter means gateway's IP.
 IPSec Port: If L2TP is opened too, it means the port listened by L2TP. L2TP's default
port is 1701.
 IPSec Identify:
For server, please set this parameter to "@server".
For client, please set this parameter to "@client".
Add: 3F, 1st Building, 23# Wanghai Road, Xiamen
Web:http://en.caimore.com
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
Tel: +86-592-5902655
Fax:+86-592-5975885