Yamaha CRW4416S User Manual page 12

Chapter 2 - Installing the Yamaha CRW4416S Drive
Note: When you are using Windows 95 or Windows 98, and if the SCSI ID set-
ting on the rear panel is the same as the number assigned to another
SCSI device, the Plug and Play component of Windows 95 or Windows
98 will automatically assign an unused number to the CRW4416S
(SCAM protocol level 1).
Parity setting
Parity ON (with a jumper)
— Parity Check will be performed. Normally, use this setting.
Parity OFF (without a jumper)
— Parity Check will not be performed.
6
1 2 4 1 2 4
SCSI ID 0 SCSI ID 1
1 2 4 1 2 4
SCSI ID 4 SCSI ID 5
* Use jumper connectors to short the locations shown in black.
Parity ON (default)
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
1 2 4
* Use jumper connectors to short the locations shown in black.
SCSI ID Setting
1 2 4
SCSI ID 2
1 2 4
SCSI ID 6
Parity OFF
1 2 4
1 2 4
SCSI ID 3
1 2 4
SCSI ID 7
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE