Basic Controls - Yamaha PDM-1 Operating Instructions Manual

Basic Controls

Main POWER ON/OFF Switch
The Power Indicator will light.
•
POWER-OFF Indicator not illuminated
(The unit will still consume some power
as long as the power cord is inserted into
the wall outlet.)
..... Red
•
STAND-BY
•
POWER-ON.....Green
STAND-BY (ON/OFF) button
The plasma display must first be plugged into the wall
outlet and turned on at the power switch (see page 18).
Push this button to turn the plasma display ON, from STAND-
BY mode. Push it again to turn the plasma display OFF to
STAND-BY mode.
STATUS button
Push the "STATUS" button to display
the current system status.
V I D E O
NORMAL
OFF TIMER 90
1 VIDEO (S VIDEO), COMPONENT/
RGB, PC mode
2 ASPECT mode (see page 22)
3 OFF TIMER
The OFF TIMER indicator is displayed
only when the off timer has been set.
(see page 25, 26, 28, 29)
PICTURE button
(see page 28)
PICTURE POS./SIZE button
(see page 24)
Push the "PC" mode selection
button to select the PC mode.
This button is used to switch
directly to PC mode.
10
R - STANDBY
G POWER ON
Power Indicator
(VIDEO (S VIDEO), COMPONENT/RGB
and PC Mode Selection)
Push the "INPUT" button to select VIDEO
(S VIDEO), COMPONENT/RGB and PC
input signal modes sequentially.
(see page 19)
1
2
3
N
N
N button
PICTURE PICTURE
PICTURE PICTURE
POS. /SIZE POS. /SIZE
PC
PC button
The plasma display may be preset to switch to stand-by after a fixed period. The
setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer
cancelled) each time the button is pressed.
When three minutes remain, "Off timer 3" will flash.
The off timer is cancelled if a power interruption occurs.
—
INPUT
INPUT button
SURROUND button
(see page 27)
INPUT INPUT
SURROUND SURROUND
VOL VOL
R
R
SOUND SOUND SET UP SET UP
ASPECT ASPECT
OFF TIMER OFF TIMER
PC
OFF TIMER button
+
VOL
VOLUME Adjustment
Push the Volume Up "+" or
Down "–" button to increase
or decrease the sound
volume level.
INPUT button
(VIDEO (S VIDEO), COMPONENT/
RGB and PC Mode Selection)
Press to select VIDEO (S VIDEO),
COMPONENT/RGB and PC input
signal modes sequentially. (see page 19)
Sound mute On/Off (see page 26)
VOLUME Adjustment
Press the Volume Up "+" or Down
"–" button to increase or decrease
the sound volume level.
R button (see page 21)
ACTION button
Press to make selections
POSITION buttons
SET UP button (see page 20)
SOUND button (see page 26)
ASPECT button
Press to adjust the aspect.
(see page 22)
30 60 90
0