Table of Contents
Advertisement
Basic Controls
Main Power On/Off Switch
Power Indicator
The Power Indicator will light.
•
Power-OFF ..... Indicator not illuminated (The
unit will still consume some power as long as
the power cord is still inserted into the wall
outlet.)
•
Stand-by
.... Red
•
Power-ON ...... Green
Press the "Status" button to display the current system status.
1 AV(S Video), Component/RGB, PC mode
2 Aspect mode (see page 22)
3 Off timer
The off timer indicator is displayed only when the off timer has
been set.
PICTURE POS./SIZE button
16
R - STANDBY
G POWER ON
PDM-1
(AV(S Video), Component/RGB and
PC Mode Selection)
Press the "INPUT" button to select AV
(S Video), Component/RGB and PC
input signal modes sequentially.
(see page 19)
Stand-by (ON/OFF) button
The plasma display must first be plugged into the wall outlet and turned on
at the power switch (see page 18).
Press this button to turn the plasma display On, from Stanby mode. Press it
again to turn the plasma display Off to Stanby mode.
AV
1
4 : 3
2
Off timer
90
3
(see page 24)
—
INPUT
INPUT button
Status button
(see page 25, 26, 28, 29)
Press the "PC" mode selection button to select the PC mode.
This button is used to switch directly to PC mode.
+
VOL
Volume Adjustment
Press the Volume Up "+"
or Down "–" button to
increase or decrease the
sound volume level.
N button
PICTURE button
(see page 28)
PC button
Advertisement
Table of Contents
