Yamaha PDM-1 Operating Instructions Manual page 25

When the Position Left " " button is pressed
H-POS
When the Position Left " " button is pressed
H-SIZE
When the Position Left " " button is pressed
V-POS
When the Position Left " " button is pressed
V-SIZE
Flickering and distortion can be eliminated by using the Position Left " " or Right " " button to
CLOCK PHASE
(RGB/PC in Mode) carry out adjustment.
Helpful Hint (
While the PICTURE POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.
N
/ Normalization)
NORMALIZE
Adjusting PICTURE POS./SIZE
When the Position Right " " button is pressed
When the Position Right " " button is pressed
When the Position Right " " button is pressed
When the Position Right " " button is pressed
25