Graphical.screens.(Live.recording,.Or.last.recorded.data) - Crystal nVision Reference Recorder Operation Manual

Graphical.Screens.(Live.Recording,.or.Last.Recorded.Data)

The nVision graphical screens allow you to view
the advanced viewing capabilities of the nVision display.
Like the numerical screens, the border of the graphical screens wraps around the display with a
bias towards the module under test. The following is an example of a 3KPSI module (PM) located
in the lower bay, with the cursor moved to the center of a 57 second Live Recording run (REC
icon is present).
The upper module data will also have its border wrapping around the top for identification
purposes. The following is a representative screen from a temperature (RTD100) module located
in the upper bay.
If you desire to view both the upper and lower graphical displays simultaneously, the dual view
is also possible.
When viewing data with a dual PM or dual RTD100 module installation, the graphed data will
represent the actual, pre-tare readings and not the ∆P or ∆T reading. As a result, the Tare value
will not be indicated in this view.
live recording
Horizontal Time Bar
Date and time of cursor location
Lower Module Graphical Screen
Upper Module Graphical Screen
Dual Module Graphical Screen
nVision Operation Manual
or last recorded data utilizing
• Page 13