Making The Power Connections - Bose Lifestyle ROOMMATE Owner's Manual

S
ETUP

Making the power connections

Figure 5
RoomMate speaker power
connections
DC power cord
Make sure DC Power
label faces up.
8
1. Insert the DC power cord from the power pack into the DC Power jack on the rear panel
®
of the RoomMate speaker. Make sure the DC Power label faces up (Figure 5).
2. Insert the small connector of the AC power cord into the power pack. Plug the other end
into an appropriate AC receptacle.
The speaker is now in standby mode, ready to use. Turn to
"Installing batteries in the PERSONAL music center II" on page 9.
Power pack
Français Español
DC power jack
AC power cord
Small connector of
AC power cord
English