Advertisement
CONNECT PIE-1 TO THE RLS UNIT
5
Note>>
Use a switch or hub conforming to IEEE802at type2.
Step 1
(1) Using a screwdriver, remove the cover from the RLS main unit.
Step 2
(1) Plug the power
2-pin cable to the
RLS main unit.
(2) Plug the CAT5
cable to Ethernet
connector of the
RLS main unit.
(2)
(1)
Step 5
(1) Mount the cover
onto the RLS main
unit.
6
SPECIFICATIONS
Power supply
*
PoE (IEEE802.3af/at compliant)
Power output
24VDC 800mA max, 12VDC 50mA max
Signal input
5 input for dry contacts (N.C. only)
Place of use
Outdoor (Inside of the waterproof case)
Alarm output
Redwall event code (UDP/TCP)
Operating temperature
-40 to +60°C (-40 to + 140°F)
Operating humidity
95% RH. max
Operation LED (Normal)
Green light is ON when the power is supplied by PoE
Operation LED
Yellow light blinks during communication
(When communicating)
Function setting
Use web browser
Dimension
67.5mm x 94.7mm x 33.0mm (2.66" x 3.73" x 1.30")
Weight
270g (8.8 oz: Including all parts) Main unit : 90g (3.2 oz)
Supported protocols
IPv4, ARP, UDP, TCP, ICMP, HTTP
Alarm 10-pin cable (26cm), Alarm 6-pin cable
(10cm), Alarm 4-pin cable (10cm), Power 2-pin
Accessories
cable (26cm), Power 2-pin cable (10cm), SIP
mounting plate for Gang Box, Gasket sheet for
Gang Box, No. 6-32 UNC screw (5/8 inch) x 6
*Required power less than 12.95W, can use the PoE Hub.
Required power less than 25.5W, can use the PoE Plus Hub.
*Specifications may be modified without prior notice.
Step 3
(1) Plug the power 2-pin
cable to PIE-1. Use the
24VDC connector.
(2) Set the Selector switch of
PIE-1 to the right.
(3) Lead a CAT5e cable from
the switching hub into the
RLS main unit through a
hole on its bottom.
(4) Plug the CAT5e cable to the Ethernet connector
for PoE of PIE-1.
(5) Plug the CAT5 cable, already connected to the
RLS main unit (Step 2(2)), to the Ethernet
connector for detector of PIE-1.
Step 2
(1)
(2)
(5)
(4)
Step 4
Step 3
7
DIMENSIONS
94.7 (3.73)
OPTEX CO., LTD. (JAPAN)
5-8-12 Ogoto Otsu Shiga 520-0101 JAPAN
OPTEX INCORPORATED (USA)
OPTEX SECURITY SAS (FRANCE)
OPTEX (EUROPE) LTD. (UK)
TEL:+44-1628-631000 URL:http://www.optexeurope.com/
OPTEX SECURITY Sp. z o. o. (POLAND)
Step 4
(1) Connect the power
cables.
(2) Place PIE-1 into
the cover.
(1)
(2)
Note>>
When use
REDSCAN series,
use CAT5e or
greater cable
between the PIE-1
unit and the PoE
Hub.
*Required power
less than 25.5W,
can use the PoE
Plus Hub.
Unit : mm (inch)
URL:http://www.optex.co.jp/e/
(ISO 9001 Certified) (ISO 14001 Certified)
TEL:+81-77-579-8670
FAX:+81-77-579-8190
TEL:+1-909-993-5770 Tech:(800)966-7839 URL:http://www.optexamerica.com/
TEL:+33-437-55-50-50 URL:http://www.optex-security.com/
TEL:+48-22-598-06-55 URL:http://www.optex.com.pl/
Advertisement
