Automatic Searching For The Peak Level On A Disc - Yamaha CDX-993 Owner's Manual

This convenient feature automatically finds level peak in the source. It then plays the peak repeatedly for a few moments in order for
you to adjust the recording level on the tape deck, before you begin recording.
1
Stop the unit.
2
The peak level search is performed on the disc.
1 2 3 4 5 6 7 8 9 10 11 12
1 2 3 4 5 6 7 8 9 10 11 12
Next, the part where the source level peaks is repeatedly
played. Adjust the recording level on the tape deck
listening to this sound.
18

Automatic searching for the peak level on a disc

2
1
STOP
PEAK
PEAK
PEAK
REPEAT
PEAK
REPEAT
OPEN/
SYNCHRO DIMMER TIME
CLOSE
SPACE PEAK TAPE CLEAR PROG
1 2 3
INDEX
+
4 5 6 I0
7 8 9 0
REPEAT RANDOM
SEARCH
– +
OUTPUT LEVEL SKIP
STOP PAUSE PLAY
To cancel this function
Press the STOP button. (Some other buttons can also be used
to cancel this function.)
Notes
• Sound peak levels are randomly selected by this unit's
internal microcomputer. Therefore, even if a peak search is
performed twice or more on the same disc, the same peak
may not be selected each time. However, this will not greatly
affect the adjustment of recording levels.
• In Program Play mode, this feature functions with
programmed tracks only. If Program Play is being performed,
first press the STOP button, and then press the PEAK
button. If Program Play is not being performed, press only
the PEAK button.