Automatic Searching For The Peak Level On A Disc - Yamaha CDX-9 Owner's Manual

This convenient feature automatically searches a disc for a part where the source level peaks, and next plays the part repeatedly.
For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
1
Stop the unit.
2
The peak level search is performed on the disc.
Next, the part where the source level peaks is repeatedly
played. Adjust the recording level on the tape deck
listening to this sound.

Automatic searching for the peak level on a disc

2
1
STOP
PEAK
PEAK
PEAK
REPEAT
PEAK
REPEAT
OPEN/
SYNCHRO DIMMER TIME CLOSE
SPACE PEAK TAPE CLEAR PROG
1 2 3
INDEX
+
4 5 6 I0
7 8 9 0
REPEAT RANDOM
SEARCH
SKIP
STOP PAUSE PLAY
To cancel this function
Press the STOP button. (Some other buttons can also be used
to cancel this function.)
Notes
•
Even if the peak level search is performed twice or more on
the same disc, the same part will not be always selected,
because this unit will search for the peak level among parts
on the disc that are randomly selected by the internal
microcomputer.
•
In the program play mode, this feature will function among
the programmed tracks only. If program play is being
performed, first press the STOP button, and then press the
PEAK button. If program play is not being performed, only
press the PEAK button.
17