Automatic Searching For The Peak Level On A Disc - Yamaha CDC-655 Owner's Manual

Automatic searching for the peak level on a disc

This convenient feature automatically searches for the part on a disc where the source level peaks, and next plays the part
repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
PROG
3
1
Stop the unit.
2
Select the "1DISC" disc play mode.
MODE
3
Select the disc.
Notes
•
Even if the peak level searching is performed twice or more
on the same disc, the same part will not be always selected,
because this unit will search for the peak level among parts
on the disc that are randomly selected by the internal
microcomputer.
TAPE REPEAT RANDOM
2
1 2 3 MODE
+
4 5 6 10
7 8 9 0
DISC SKIP
DISC
SCAN
SKIP PAUSE PLAY
1
SEARCH INDEX
STOP
+
–
OUTPUT LEVEL
SYNCHRO
STOP
1DISC
DISC SKIP
4
The peak level searching is performed through the disc.
1DISC
8 9 10 1 1 1 2
1DISC
8 9 10 1 1 1 2
Next, the part where the source level peaks is repeatedly
played. Adjust the recording level on the tape deck
listening to this repeat play.
To cancel this function
Press the STOP button.
•
In the program play mode, this feature will function among
the programmed tracks only. If program play is being
performed, first press the STOP button, and then press the
PEAK button. If program play is not being performed, only
press the PEAK button.
•
To search for the peak level through all discs on the disc
tray, in step 2, select the "5DISC" disc play mode.
4
0
PEAK
1DISC PROG
INDEX
TOTAL
REMAIN
10 1 1 1 2
REP
REP
21