T.M.D.S. Data 2/4 Shield 11 T.M.D.S. Data 1/3 Shield 19 T.M.D.S. Data 0/5 Shield
4
T.M.D.S. Data 4-
12 T.M.D.S. Data 3-
5
NT.M.D.S. Data 4+
13 T.M.D.S. Data 3+
6
DDC Clock
14 +5V Power
7
DDC Data
15 Ground (for +5V)
8
No Connect
16 Hot Plug Detect
Universal Serial Bus (USB) Interface
This monitor supports High-Speed Certified USB 2.0 interface.*
USB ports:
1 upstream - rear
l
4 downstream - 2 on rear; 2 on left side
l
NOTE: USB 2.0 capability requires 2.0 capable computer.
NOTE: Monitor's USB interface works ONLY when monitor is Powered ON (or in Power Save Mode). Switching your monitor OFF and then ON
would re-enumerate its USB interface; attached peripherals may take a few seconds to resume normal functionality.
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user
can select different settings, but in most cases monitor installation is automatic.